|
|
Details
- 2U Rack Mount Chassis
- 8 hot swappable SATAII drive bays
- Power Supply; 2+1 Hot-swap Redundant (3x300Watt)
- 3.5"(H) x 19"(W) x 19.5"(D)
- Weight without drives 35lbs
The whole Q Series has these features in common:
Support and Warranty
- 3 Year Warranty
- 3 Year Support
Compatibility
- Supports all major SATA-I and SATA-II drives
- Supports IETF iSCSI RFC, draft 20
- Compatible with all iSCSI Draft 20-compliant initiators
- Compatible with Cisco, UNH, and Microsoft software initiators
- Compatible with all major hardware initiators and offload cards
- OS Independent
- Error recovery level 0
- CHAP authentication
- Multiple connections per session
- Cluster ready (up to 16 nodes), no charge
- Stand alone Discovery software with SLP, iSNS and DHCP support
- Available with or without drives
- Supports Microsoft Virtual Disk Service and MS MPIO support
RAID Features
- Supports RAID 0,1,3,5,6,10,30,50,60 and JBOD
- N-way mirroring
- Write-Through or Write-Back caching per volume
- Dedicated or shared cache allocation
- Tagged command queuing support
- Multiple IO transaction processing support
- Configurable RAID height/stripe
- Online capacity expansion
- Instant RAID volume availability
- Auto volume rebuild
- RAID roaming
- Volume Snapshot in hardware (supports VSS) 32 snapshots
- 64-bit dedicated RAID processor
- Dual PCI bus architecture
- 64-bit 133MHz PCI-X bridge
- 512MB cache (upgradeable to 2G)
- Optional battery backup module
- Online system firmware upgrade mechanism
- Run-time IO transaction recording
- Drive Failure; LED Indicator for each HDD
- Smart faulty sector relocation
- Status LEDs; 1 x access LED for each HDD
- Multiple array support (up to 8 separate arrays)
- 128 Logical Volume
- LUN masking for access control
- Hot-swap drive support
- S.M.A.R.T. feature support
- Hot spare/global spare drive support
- Built-in alarm with mute button
- User configurable via control panel
- Web browser remote GUI management
- RS232 VT100 ANSI terminal emulation
- Event & fault notification via e-mail and SNMP
Physical Characteristics
- 2 Copper GbE Ports, Load Balancing or Fail-Over
- 1 Copper 100Mbit port for management
- UARTS for serial console management and UPS
- Backlit LCD control panel
- S.E.S support for enclosure management
- System Fans; 3 hot-swappable blowers
- Fan-fail LED; 1 x fan-fail LED for system
- Mute Button; 1 x mute button for fan & temp alarm
- Temperature; built in thermal & fan sensor
- Operating Temperature 10°C ~ 35°C
- Non-Operating Temperature -10°C ~ 50°C
- Operating Humidity 20% to 90% non-condensing
Low cost,
high performance, simple options,
no hidden costs, simple operation;
What else could you want from storage?